For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.
Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.
USING PAGE
To page the person who has the hand- set or to locate the handset when the phone is not in use, press PAGE on the base. The handset beeps three times. If you hold down PAGE for
USING TONE SERVICES ON A PULSE LINE
Some special services, such as bank-
1.Be sure T/P is set to P.
2.Dial the service’s main number.
3.When the service answers, press
. Any additional numbers you dial are sent as tone signals.
4.After you complete the call, return the handset to the base or press TALK. The phone automatically resets to the pulse mode.
16
To stop it from beeping before it auto- matically stops, press TALK.
MEMORY DIALING
You can store up to 9 numbers in mem- ory, then dial a stored number by press- ing a
Each number you store can be up to 16 digits long.
Storing a Number in Memory
Notes:
•An error tone sounds and the phone exits the programming mode if you wait more than 30 seconds between each keypress or enter more than 16 digits.