7.Plug the adapter into a standard AC outlet.
8.Lift the base’s antenna to a vertical position.
MOUNTING THE BASE ON A WALL PLATE
1.Remove the bracket by holding in both tabs and gently pulling out the wide end of the bracket.
2.Plug one end of the supplied short modular cord into the phone jack on the back of the base. Route the modular cord through the left slot on the bottom of the base.
Phone Jack
8
3.Insert the supplied AC adapter’s barrel plug into the DC 12V jack on the back of the base. Route the adapter’s cord through the right slot on the bottom of the base.
DC 12V
Jack
4.Route the other end of the short modular cord through the center of the bracket.