Radio Shack ET-925 owner manual Mounting the Base Directly on the Wall

Page 8

43-1095.fm Page 8 Tuesday, August 17, 1999 3:37 PM

5.Plug the short modular cord into the wall plate jack, press the ex- cess cord into the slot in the cen- ter of the base, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.

Slot for

Excess

Cord

6.Press and lift out the handset holder, turn it over and rotate it 180°, then snap it back into place so it holds the handset.

7.Plug the adapter into a standard AC outlet. The POWER indicator on the base lights.

8.Lift the base’s antenna to a verti- cal position.

8

Mounting the Base Directly on the Wall

For this mounting method, you need two flat-head wood screws (not sup- plied) with heads that fit into the key- hole slots on the bottom of the base.

1. Drill two holes

35/16

3/16

inches

apart.

Then

 

 

 

 

 

 

 

 

 

 

thread

a screw into

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

each hole, letting the

 

 

 

 

 

heads

extend

about

 

 

 

 

 

35/16

 

 

 

3/16 inch from the

 

 

 

 

 

 

 

 

 

 

wall.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base.

3.Route the modular cord through the upper and lower grooves on the bottom of the base.

Upper

Groove

Lower

Groove

Image 8
Contents ET-925 Features Fm Page 3 Tuesday, August 17, 1999 337 PM Read this Before Installation FCC StatementContents Placing the Base on a Desk Top InstallationSelecting a Location Mounting the Base on a Wall Plate Mounting the Base Directly on the Wall Fm Page 9 Tuesday, August 17, 1999 337 PM Connecting and Charging the Battery Pack Setting the Dialing Mode Setting the Ringer Using a HeadsetOn the Handset On the BaseFm Page 13 Tuesday, August 17, 1999 337 PM Using the Handset Using the SpeakerphoneOperation Making Receiving CallsUsing Mute Switching Between the Handset and SpeakerphoneUsing Both the Handset and Speakerphone Changing the ChannelUsing Redial Using FlashStoring a Number in Memory PagingMemory Dialing Entering a Pause Dialing a Memory Number Chain-Dialing Service NumbersTesting Stored Emergency Numbers Troubleshooting Problem SuggestionFm Page 21 Tuesday, August 17, 1999 337 PM Care and Maintenance Replacing Battery Pack FCC Wants YOU to Know LightningFm Page 25 Tuesday, August 17, 1999 337 PM Fm Page 26 Tuesday, August 17, 1999 337 PM Fm Page 27 Tuesday, August 17, 1999 337 PM RadioShack

ET-925 specifications

The Radio Shack ET-925 is a handheld electronic device that gained notoriety in the late 1980s for its innovative design and functionality. This versatile device was widely recognized for its comprehensive set of features, making it a practical tool for both professionals and hobbyists.

One of the standout characteristics of the ET-925 is its compact design. It was lightweight and small enough to fit comfortably in the user's hand, making it highly portable. The device was particularly popular among technicians and engineers who appreciated its practicality for fieldwork. The ergonomic layout of the buttons and the clear display made it user-friendly, allowing for easy navigation through its various functions.

The ET-925 was equipped with a variety of technologies that set it apart from other devices of its time. It featured an advanced microprocessor, which enabled it to perform complex calculations quickly and accurately. This was a significant advantage in an era when many handheld devices were limited in their computational capabilities. The microprocessor allowed for enhanced performance, enabling the ET-925 to serve as a reliable tool for scientific and engineering tasks.

Another notable feature of the ET-925 was its extensive memory capacity. The device could store multiple equations and data sets, providing users with quick access to frequently used information. This feature was particularly beneficial for professionals who needed to perform repetitive calculations or recall specific data on a regular basis.

The ET-925 also included a range of measurement functions, including voltage, current, and resistance measurements. It could be utilized as a digital multimeter, making it an invaluable tool for electrical engineers and hobbyists alike. The device's accuracy and reliability in measuring electrical parameters contributed to its popularity in technical fields.

In addition to its measurement capabilities, the ET-925 came with a backlit display that improved visibility in low-light conditions. This feature enhanced the device's usability, allowing users to work effectively in a variety of environments.

Overall, the Radio Shack ET-925 was an exemplary product of its time, characterized by its portable design, advanced processing capabilities, extensive memory, and multifunctional measurement features. This remarkable device continues to be remembered fondly by those who used it in various applications, solidifying its place in the history of handheld technology.