3.When the service answers, press TONE/ 
. Any additional numbers you dial are sent as tone signals.
4.After you complete the call, return the handset to the base, press TALK, or press SPEAKER. The phone automatically resets to the pulse mode.
Notes:
•Make sure you press TALK or SPEAKER twice to stop the hand- set from beeping. If you press TALK or SPEAKER only once, you get a dial tone.
•If you press PAGE for less than 2 seconds, the handset beeps for only 2 seconds.
•If you receive a call while the page is sounding, the handset stops beeping and the handset and base start ringing.
PAGING
To page the person who has the hand- set or to locate the handset when the phone is not in use, hold down PAGE on the base for at least 2 seconds. The handset beeps for 1 minute. To stop it from beeping before it automatically stops, press TALK on the handset (or SPEAKER on the base) twice.
MEMORY DIALING
You can store up to 20 numbers in the
Storing a Number in Memory
Notes:
•The phone beeps 5 times and exits the programming mode if you wait more than 20 seconds between key presses.
•You cannot dial the number stored in one memory (base or handset) using the keypad on the other.
17