Storing a Number in Memory

43-1042.fm Page 13 Tuesday, August 17, 1999 10:28 AM

1.Press MEMORY.

illustration

Note: While you are storing a number in memory, if you do not press any button on the keypad within about 10 seconds, a buzz sounds. You must start the pro- cess over from the beginning.

2.Dial the phone number you want to store.

3.Press MEMORY again.

4.Press the memory location num- ber (0-9) where you want to store the number. A long beep sounds. The phone number is now stored in memory.

5.Pull out the memory index card from the right side of the base. Write the person’s or company’s name and memory location num- ber on the card in pencil (in case you want to store a different num- ber later).

6.Repeat Steps 1-5 to store other telephone numbers.

Notes:

•If you receive a call while you are storing a number in memory, press TALK to answer the call. After the call, begin again at Step 1 to store the number.

•To change a number stored in memory, simply store a new num- ber in that memory location.

•To clear a memory location so no number is stored there, press MEMORY twice, then press the memory location number. A long beep sounds. The number is now cleared from memory.

If a buzz sounds, you did not suc- cessfully clear the memory loca- tion. Try the process again.

illustration