SETTING THE DIALING MODE
Set TONE/PULSE on the back of the base for the type of service you have. If you are not sure which type you have, do this test.
1.Set TONE/PULSE to TONE.
illustration
2.Lift the handset, press TALK, and listen for a dial tone.
3.Press any number other than 0.
If the dial tone stops, you have
If the dial tone continues, you have pulse service. Set TONE/ PULSE to PULSE.
TURNING ON/OFF THE RINGER
To turn off the ringer, press and hold RINGER ON/OFF for about 2 seconds (until a long beep sounds). When the ringer is off, the RINGER ON/OFF but- ton flashes red.
To turn on the ringer, press and hold RINGER ON/OFF for about 2 seconds (until a short beep sounds).
Note: With the handset’s ringer off, you can still make or receive calls us- ing the cordless phone. Telephones on the same line still ring when there is an incoming call, and the TALK light on the handset and the IN USE/ CHARGE indicator on the base flash until you answer the call.
9