Answering System Operation
5'66+0)"6*'"4'%14&"6+/'
You can set the recording time to ', *, or 7 (Announce Only)ýto determine how the system records incoming messages.
When set to ' or *, the system plays the outgoing message and lets callers leave a message up to 1 minute (for ') or 4 minutes (for *) long. When set to 7, the system plays the outgoing message but does not let callers leave a message.
1.Press MENU four times. The system announces
“Record time” followed by the current setting. The current setting — ', *, orý7 — appears.
2.Repeatedly press 6or7until the desired number appears.
3.Press SET/RING to store the setting.
The system beeps and announces “Record Time” followed by the currently set record time.
5'66+0)"6*'"/'55#)'"#.'46" 610'
The Message Alert feature lets you know you have new messages by sounding a short beeping tone. When a new message is received with the message alert on, the alert tone sounds every 15 seconds.
1.Press MENU five times. The system announces
“Message Alert” followed by the current setting. The current setting — E< (Off) or Ed — appears.
2.Press 6or7to select Ed or E<.
3.Press SET/RING to store the setting. A beep sounds, then the system announces “Message Alert” followed by the new setting.
When the first new message is received, a beep sounds.
28