5'66+0)"#761"6#.-
Your phone is preset so you must press TALK/ FLASH to answer a call. With Auto Talk turned on, you can answer a call by just lifting the handset from the baseor cradle. Auto Talk is independent in each handset. You can set each handset differently.
1.Lift the handset and hold down CID/MENU until the setup menu appears.
2.Press CH/SEL to change the Auto Talk setting. Ed or E\\ appears.
3.To clear the screen when you finish, press END or return the handset to the base or cradle.
6740+0)"%#..'4"+&1%#.." 9#+6+0)"1011((
If you have Call Waiting and Caller ID service, you can set the system to show Caller ID information for an incoming call even while you are on the phone.
1.Lift the handset and hold down CID/MENU until the menu appears.±
2.Press 2 or 9 to select 9?:9Mý(Caller ID/Call Waiting).
3.Press CH/SEL to change the Caller ID/Call Waiting setting. Ed or E\\ appears.
4.Press END and return the handset to the base to store the new setting.
5614+0)";174"#4'#"%1&'
You can store your local area code in the phone’s Caller ID record so the area code does not appear if the received call is from your local area. If for some reason you need to dial the area code (or store it in memory), you can add it afterwards. See “Adding/ Deleting the Area Code” on Page 24.±ý
Installation
±"016'"±"
Turning Caller ID/Call
Waiting On/Off
This setting must be made from HS1. The CIDCW menu does not appear on HS2.
Storing Your Area Code
•If your calling area requires
•The area code setting is independent in each handset. You can set either handset to a different area code.
13