Speed Dial
Speed Dial
Your telephone can store up to nine telephone numbers with names (up to 14 characters and 24 digits in each location) in the speed dial memory locations you assign in the handset.
Store a Speed Dial Entry
1.Press PROG and then press 
or 
until the screen displays SPEED DIAL.
2.Press SELECT. The screen displays ENTER
3.Press a key (1 through 9) to assign the speed dial location to store this number. The screen displays ENTER NAME.
4.Use the dial pad keys to enter the name (see “Character Chart” on page 17) and then press SELECT or PROG.
•Press 
to move the cursor to the left or 
to the right.
•Press CHAN/REMOVE to erase a character.
5.The screen displays ENTER NUMBER.
6.Use the dial pad keys to enter the telephone number, and then press SELECT or PROG.
•Press 
to move the cursor to the left or 
to the right.
•Press CHAN/REMOVE to erase a digit.
7.Press REDIAL/PAUSE to insert a dialing pause (P will be displayed).
8.The screen displays DISTINCT RING? and the current setting.
8.Press 
or 
to choose Y (yes) to customize this entry, or choose N (no) for a normal ringer. If you choose Y, 
will be displayed with the entry.
9.Press SELECT or PROG to confirm. You will hear a confirmation tone.
nNotes:
•The entries stored in the speed dial memory will be numbered 01 through 09 and share the memory in the directory.
•Press OFF at any time to exit speed dial mode.
•If the location is not empty, the new entry will replace the old entry and the old entry will be moved to a directory location.
20