Additional Info
Specifications
Frequency control | Crystal controlled PLL synthesizer |
|
|
Transmit frequency | Handset: |
| Telephone base: |
|
|
Channels | 30 |
|
|
Nominal effective range | Maximum power allowed by FCC and IC. |
| Actual operating range may vary according to |
| environmental conditions at the time of use. |
|
|
Size | Handset: 7.32in X 2.01in X 1.57in |
| (186.0mm X 51.0mm X 40.0mm) |
| Telephone base: 4.33in X 5.34in X 3.78in |
| (110.0mm X 135.6mm X 96.0mm) |
|
|
Weight | Handset: 5.14oz (145.6g) (including battery) |
| Telephone base: 5.26oz (149g) |
|
|
Power requirements | Handset: 3.6V 400mAh |
| Telephone base: 7.5V AC @ 200mA |
|
|
Memory | Handset directory: 20 memory locations (9 speed |
| dial inclusive); up to 24 digits and |
| 14 characters |
| Handset call log: 45 memory locations; up to 11 |
| digits and 15 characters |
|
|
FCC Information
This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
38