Temporary Tone Dialing
If you have pulse (rotary) service, you can change from pulse to touch tone dialing during a call by pressing TONE*. This is useful if you need to send touch tone signals to access telephone banking or long distance services.
Once you have initiated your call by dialing the phone number in pulse (rotary), press TONE*. Now, all subsequent key presses are sent as touch tone signals.
After you hang up, the phone returns to pulse (rotary) dialing for the next call.
Redial
The telephone stores the five most recently dialed telephone numbers in the redial list. When the list is full, the oldest entry is deleted to make room for the new entry.
1.Press REDIAL/PAUSE, then press 
, 
, or REDIAL/PAUSE repeatedly to review the redial list. Press CHAN/REMOVE to delete the displayed number.
2.Press 
/FLASH, then press REDIAL/PAUSE to dial the last telephone number dialed.
•Press REDIAL/PAUSE, then press 
, 
, or REDIAL/PAUSE repeatedly until the desired entry displays, then press 
/FLASH to dial the number.
Find Handset
Press FIND HANDSET on the telephone base to locate the handset and the handset is not placed in the telephone base. The handset rings and **PAGING** will be displayed on its screen.
•Press FIND HANDSET again or put the handset back on the telephone base to stop the paging tone.
•Press OFF on the handset to stop the paging tone on the selected handset.
Operation
15