Radio Shack 43-3548 owner manual On a Wall

Page 10

Installation

4.Plug the adapter into a standard AC outlet.

5.Lift the base’s antenna to a vertical position.

On a Wall

To mount the phone directly on a wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base.

1.Drill two holes 315/16 inches (100 mm) apart. Then thread a screw into each hole, letting the heads extend about 1/8 inch (3 mm) from the wall.

2.Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base.

3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.

4.Route the adapter and modular cords through the grooves on the bottom of the base.

5.Align the base’s keyhole slots with the mounting screws and slide the base downward to secure it.

6.Plug the modular cord’s other end into the phone jack, and plug the adapter into a standard AC outlet.

7.Lift the base’s antenna to a vertical position.

Image 10

Contents GHz Cordless Telephone Caller ID/Call Waiting IDContents InformationContents Important Safety Instructions Battery Safety Instructions Important Safety Instructions Introduction Installation Selecting a LocationOn a Desk Top On a Wall PlateOn a Wall Recharging the Battery Pack CONNECTING/CHARGING the Battery PackInstallation Operation Making and Receiving CallsEarpiece volume Handset ringer tone and volumeAdjusting the Handset Ringer and Earpiece Volume Redial Tone Dialing SWITCH-OVERTemporarily Mute Ringer Traveling OUT-OF-RANGESelecting a Different Channel Voice Mail Waiting IndicatorVoice Mail Waiting Indicator Flash and Call WaitingAuto Talk Setting Menu OptionsCaller ID options Area Code Choosing the dialing modeChoosing the dialing mode Area CodeSetting the language Storing Phone Numbers and Names Storing Phone Numbers and Names Steps for Entering Names and Special Characters Memory dialing from Standby Mode Memory dialing from Standby ModeMemory dialing from Talk Mode If you make a mistake while entering a nameChain Dialing Memory dialing from Talk ModeEditing a Stored Name AND/OR Phone Number Operation Erasing a Stored Name and Phone Number ONE-TOUCH Speed Dial Testing Stored Emergency NumbersStoring and Editing the Speed Dial Deleting the Speed Dial Making Calls withCaller ID When the Telephone Rings You may receive any one of the following messagesDeleting Information from the Caller ID List Deleting a Caller ID messageViewing the Caller ID Message List Viewing the Caller ID Message ListCalling a party from the Caller ID list Using the Caller ID ListDeleting all Caller ID names/ numbers Ô Deleting all Caller ID names/numbers You cannot make a callStoring Caller ID messages in Memory dialing Long Distance calls and Area Code Setting/CancellationLong Distance calls and Area Code Setting/ Cancellation Storing Caller ID Messages in Memory dialogUsing a Headset Troubleshooting Problem SolutionService and Repair CareRadioShack Corporation