Ô NOTE Ô
Memory dialing from Talk Mode
If you select a memory location that does not have a stored number, the phone will not dial.
Operation
3.Press VOL e or VOL d keys, or enter a number (01 - 20) to select the memory location of the desired phone number. The selected name is displayed. Ô
4.The phone number in the memory will be dialed when the SELECT key is pressed.
5.To hang up, press end.
CHAIN DIALING
The memory locations on the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, and are prompted to enter the account number, press MEM and select the location number where the special number has been stored, then press SELECT.
Store your special number with an identifying name. (Refer to “Storing Phone Numbers and Names” on page 20.)
EDITING A STORED NAME AND/OR PHONE NUMBER
1.Press MEM, ¨Select Memory¨ is displayed.
2.Press VOL e or VOL d keys, or enter a number (01 - 20) to select the memory location you would like to edit, and press MEM or SELECT.
24