Radio Shack TRC-488 owner manual Receiving Transmissions on the Channels

Page 11

21-1585.fm Page 11 Thursday, August 5, 1999 9:39 AM

Your TRC-488 receives the following frequencies available to NOAA:

162.400 MHz

162.500 MHz

162.425 MHz

162.525 MHz

162.450 MHz

162.550 MHz

162.475 MHz

 

To select one of the seven available weather channels, set the mode selec- tor to W1-W7. The yellow WX LED lights.

(illus)

RECEIVING TRANSMISSIONS ON THE CHANNELS

After setting squelch, follow these steps to receive transmissions.

1.Set the mode selector to CB.

(illus)

2.To select the emergency channel (9), slide CH9/OUT to CH9. CH9 flashes on the display.

(illus)

Important: The emergency chan- nel is used for reporting and moni- toring emergency information about accidents, hazardous road conditions, etc. Do not use Chan- nel 9 for non-emergency mes- sages.

Note: You cannot receive trans- missions on Channel 9 when the mode selector is set to any of the W1-W7weather channels.

3.To select one of the other 39 channels, slide CH9/OUT to OUT. Turn CHANNEL to select the desired channel. The channel number appears on the LED channel display.

(illus)

11

Image 11
Contents Channel 2-WAY CB Radio TRC-488Features Contents Mounting the TRC-488 InstallationMounting Microphone Holder Connections Connecting MicrophoneConnecting AN Optional External Speaker Using Vehicle Battery Power Connecting PowerInstalling AN Antenna Adjusting ANTENNA’S SWR Listening to Weather Broadcasts Setting SquelchUsing Automatic Noise Limiting OperationReceiving Transmissions on the Channels Transmitting CB Courtesy CB TipsCommon Uses for a CB Radio Code Meaning Using Common 10-CODESProblem Solution TroubleshootingReducing Noise Maximum RangeMaintenance FCC Information Replacing the FusesReceiver SpecificationsRadio Shack Limited Warranty