Radio Shack TRC-488 owner manual Mounting Microphone Holder

Page 5

21-1585.fm Page 5 Thursday, August 5, 1999 9:39 AM

4.Attach the CB to the mounting bracket using the supplied rubber washers and mounting knobs.

(illus)

MOUNTING THE

MICROPHONE HOLDER

With a Phillips screwdriver and the supplied screws and washers, attach the supplied microphone holder to the CB’s right side.

(illus)

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Channel 2-WAY CB Radio TRC-488Features Contents Mounting the TRC-488 InstallationMounting Microphone Holder Connections Connecting MicrophoneConnecting AN Optional External Speaker Using Vehicle Battery Power Connecting PowerInstalling AN Antenna Adjusting ANTENNA’S SWR Using Automatic Noise Limiting Setting SquelchOperation Listening to Weather BroadcastsReceiving Transmissions on the Channels Transmitting CB Courtesy CB TipsCommon Uses for a CB Radio Code Meaning Using Common 10-CODESProblem Solution TroubleshootingReducing Noise Maximum RangeMaintenance FCC Information Replacing the FusesReceiver SpecificationsRadio Shack Limited Warranty
Top Page Image Contents