Programming the Weatheradio‚
10
channel appear. AUTO appears and the Weatheradio beeps.
To manually search for channels, press g when MANUAL appears. CHANNEL and the number of the currently selected channels appear. The Weatheradio tunes to a channel and turns on the broadcast. To select another channel, repeatedly press e or d until the desired channel number appears.
4.Press g to confirm the selection. A beep sounds and CH, the number of the currently selected channels, and SELECT (the newly selected channel) appear. Then SELECT CH appears. Press MENU to exit.
SELECTING ALERT MODE
You can set the Weatheradio to respond to an NWS alert broadcast in one of two ways:
TONE — The Weatheradio sounds an alert for five minutes or until End of Message is received and an alert description appears until the alert’s effective time expires. To turn off the alert sooner, press WX. The