detected for 10 seconds, the radio switches back to the channel last selected, whether it was in Home mode or in Travel mode. In Travel Mode, the Weatheradio is configured with the following defaults:
Channel Selection — Auto
Alert Mode — Tone
Missed Alert Reminder — Off
Response Location — All Locations
TROUBLESHOOTING
If your Weatheradio is not working properly, these suggestions might help you eliminate the problem. If it still does not operate properly, take it to your local RadioShack store for assistance.
Problem | Suggestion |
|
| Make sure the AC adapter is |
|
No power. | connected to the weatheradio or a |
|
| backup battery is installed. |
|
| If the backup battery becomes weak, |
|
| your weatheradio might not sound a |
|
No sound. | tone when an alert is broadcast. Test |
|
your weatheradio’s reception |
| |
|
| |
| periodically, and replace the battery if |
|
| the tone does not sound. |
|
|
|
|
Multiple FIPS codes are stored, but | Make sure the weatheradio is set to |
|
MULTIPLE LOC mode. |
| |
the weatheradio only responds to |
| |
|
| |
weather alert broadcasts for one | Make sure the FIPS codes stored in |
|
code. |
| |
memory are correct. |
| |
|
| |
|
|
|
|
|
|
Troubleshooting
23