Radio Shack 12-259 owner manual ENABLING/DISABLING Signal Loss Reminder

Page 13

Evacuate Immediately

Fire Warning

Flash Flood Warning

Flood Warning

Hazardous Material Warning

High Wind Warning

Civil Emergency

Tropical Storm Warning Tsunami Warning

Shelter In-Place

Warning

Special Marine Warning

911 Telephone Outage Emergency

Tornado Warning

Hurricane Warning

Immediate Evacuation Warning

Unknown Warning

Volcano Warning Winter Storm Warning

Ô NOTE Ô

Í flashes to indicate the

signal loss reminder is

off. ¹ flashes to

indicate the signal loss

ENABLING/DISABLING SIGNAL LOSS REMINDER

1.Press MENU. Then press e or d until SIG REMINDER appears.

2.Press g . Í or ¹appears.

3.Repeatedly press e or d to select Í (off) or ¹ (on) . When the desired option appears, press g. Or press fto return without changes. Ô

4.Press MENU to exit.

reminder is on.

When signal loss reminder is on, with Signal Loss detected, signal loss reminder will be generated in the interval of 30 seconds, 1 minute, 1.5 minutes, 2 minutes,...up to 5 minutes. With no signal recovered, the reminder continues to beep every 5 minutes and will be terminated with any key pressed.

Programming the Weatheradio‚

13

Image 13
Contents RadioShack Portable Thank you for buyingHandheld NWR-Same Weatheradio . It usesHOW Your WEATHERADIO Works ContentsPreparation Installing BatteriesPower UP Reset Using AC PowerAdjusting Voice and Tone Volume Turning Power On and OFFAttaching the Belt Clip Programming the WEATHERADIOPress MENU. The following functions can be set Setting the AlarmSetting the Alarm Setting the ClockSelecting a Channel Selecting Temperature Display ModeChannel appear. Auto appears and the Weatheradio beeps Selecting Alert ModeENABLING/DISABLING Missed Alert Reminder Programming the Weatheradio‚ ENABLING/DISABLING Signal Loss Reminder Understanding the Fips Code Response Location Selection Obtaining Your Area’s Fips CodesPress MENU. Then press e or d until Area Select appears Selects ALL Location the first time you turn it onLOC1 ------------appears. Otherwise, LOC and Fips codes For each additional Fips code Already programmed into that memory location appearENABLING/DISABLING Alert Tones Programming the Weatheradio‚ Weatheradio‚ Press g. Tone on or Tone OFF appearsReceiving Weather Alerts Viewing Signal StrengthLocking KEY Selecting TRAVEL/HOME ModeTroubleshooting TroubleshootingCheck Operation FCC Wants YOU to Know FCC Declaration of ConformityFCC Wants You to Know Care SpecificationsLimited Ninety-Day Warranty