Radio Shack TAD-1028 owner manual Preparation, Setting the Dialing Mode, Setting the DAY and Time

Page 12

43-788.fm Page 12 Monday, August 16, 1999 8:19 AM

PREPARATION

SETTING THE DIALING MODE

Set TONE/PULSE on the handset for the type of service you have. If you are not sure which type you have, do this test.

Illus. of TONE/PULSE switch.

1.Set TONE/PULSE to TONE.

2.Lift the handset and listen for a dial tone.

3.Press any number other than 0.

Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not press the access code either.

If the dial tone stops, you have touch-tone service. Leave TONE/ PULSE set to TONE.

If the dial tone continues, you have pulse service. Set TONE/PULSE to

PULSE.

SETTING THE DAY AND TIME

The answering system records the day and time of the call with each phone message. Follow these steps to set the current day and time.

Notes:

To avoid having to reset the day and time if AC power is lost, we recommend you install a backup battery before you set the day and time. See “Installing a Backup Bat- tery” on Page 6.

If you do not complete each step within 8 seconds, the TAD-1028 sounds a three-tone beep and stops setting the day and time. Start again at Step 1.

1.Use a straightened paper clip to hold down CLOCK until the TAD- 1028 beeps. The TAD then announces, “Sunday.”

Illus. showing CLOCK switch.

Note: If necessary, adjust VOLUME.

12

Image 12
Contents TAD-1028 Features Answering System FeaturesTelephone Features Read this Before Installation FCC StatementContents Installation Installing a Backup BatteryIllus. showing connection of connector to battery terminals Illus. showing removal of battery compartment coverIllus. of Volume switch Illus. showing connection of coiled cordIllus. showing cord routed through the strain relief slot Illus. of Answer PLAY/SKIP indicators Illus. showing routing of modular cordIllus. like in under On a Desk Top Illus. showing Clip being removed and reinserted Illus. showing screw positions on the wallIllus. showing coiled cord connection to handset Fm Page 10 Monday, August 16, 1999 819 AM Fm Page 11 Monday, August 16, 1999 819 AM Setting the Dialing Mode Setting the DAY and TimeIllus. of TONE/PULSE switch Illus. showing Clock switchFm Page 13 Monday, August 16, 1999 819 AM Setting the Handset Volume Using ResetUsing Redial Using Tone Services on a Pulse LineUsing the Phone Number Index Card Illus. showing Phone number index card and its coverSetting the Number of Rings Answering System OperationSetting the TAD-1028 To Answer Calls Recording Incoming MessagesScreening Calls Playing Messages Illus. showing PLAY/SKIPDeleting Messages Recording a MemoChanging the Remote Operation Security Code Illus. showing Code switch Remote Operation Remote Command Codes PressTroubleshooting Resetting the TAD-1028Care and Maintenance FCC Wants YOU to Know LightningFm Page 26 Monday, August 16, 1999 819 AM Fm Page 27 Monday, August 16, 1999 819 AM RadioShack Division of Tandy Corporation Fort Worth, Texas

TAD-1028 specifications

The Radio Shack TAD-1028 is a compact and efficient telephone answering device that gained popularity in the late 1980s and early 1990s. This device was designed to cater to the growing need for reliable, user-friendly answering solutions for home and office use. The TAD-1028 not only provided users with a way to manage calls effectively, but it also introduced several technological advancements that set it apart from its competitors.

One of the standout features of the TAD-1028 is its digital recording capability. Unlike traditional cassette-based answering machines, the TAD-1028 utilized a digital chip to record messages. This innovation provided clearer audio quality, longer message storage times, and the reliability of digital technology, reducing the risk of tape degradation over time.

The TAD-1028 had the ability to record up to 30 minutes of messages, making it ideal for users who frequently received calls while away from home. Its user-friendly interface included an easy-to-read LCD display, which allowed callers to navigate through the recorded messages easily. The device was equipped with simple control buttons, making it straightforward to play, stop, rewind, and delete messages.

Another notable characteristic of the TAD-1028 was its capability to accommodate a range of phone systems. It could connect to both single-line and multi-line phones, allowing versatility in setups. This adaptability made the TAD-1028 a suitable choice for both residential users and small businesses.

The answering machine also featured adjustable recording quality settings. Users could select between a standard setting for normal calls and a high-quality option for important messages, showcasing the device's versatility. Additionally, the TAD-1028 offered a skip and repeat function, allowing users to navigate messages efficiently.

The device was equipped with a “talking” function that announced the number of messages left, making it easier for users to keep track of their calls. Furthermore, it used a rechargeable battery backup feature, ensuring that critical messages would not be lost during power outages.

In summary, the Radio Shack TAD-1028 is a pioneering telephone answering machine, offering digital technology, extended recording capabilities, and user-friendly features. It stands as a testament to the evolution of communication devices during its time, combining practicality with technological innovation. For users seeking a reliable and efficient way to manage their messages, the TAD-1028 represented an excellent solution.