Radio Shack TAD-1028 owner manual Answering System Operation, Setting the Number of Rings

Page 16

43-788.fm Page 16 Monday, August 16, 1999 8:19 AM

ANSWERING SYSTEM OPERATION

RECORDING THE OUTGOING MESSAGE

cannot come to the phone right now.

Before you can set the TAD-1028 to an- swer calls and record messages, you must record the outgoing message (OGM) the caller hears when the TAD answers a call. Your outgoing message can be up to 60 seconds long.

1.Hold down OGM/REPEAT until the TAD-1028 beeps.

3.The TAD-1028 automatically stops recording after 60 seconds, or you can press ANSWER/STOP/DELETE when you finish the message. The TAD-1028 beeps and automatically plays back the outgoing message.

Illus. showing ANSWER/

STOP/DELETE.

Illus. showing

OGM/REPEAT.

Note: If memory is full, the PLAY/ SKIP indicator flashes, the TAD- 1028 announces, “Memory is full,” and you cannot record the outgoing message. Delete old messages to make room in memory (see “Delet- ing Messages” on Page 19).

2.Speak your message in a normal voice from about 8 inches in front of the TAD.

Illus. showing microphone.

To play the outgoing message at any time, press OGM/REPEAT. If no outgo- ing message is recorded, the TAD-1028 says, “No announcement.”

SETTING THE NUMBER OF RINGS

The 4/7/TS switch controls how long the TAD-1028 waits before it answers a call.

Illus. showing 4/7/TS switch.

Important: Do not tell callers you are not home. Instead, say that you

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents TAD-1028 Features Answering System FeaturesTelephone Features Read this Before Installation FCC StatementContents Installation Installing a Backup BatteryIllus. showing connection of connector to battery terminals Illus. showing removal of battery compartment coverIllus. showing connection of coiled cord Illus. of Volume switchIllus. showing cord routed through the strain relief slot Illus. showing routing of modular cord Illus. of Answer PLAY/SKIP indicatorsIllus. like in under On a Desk Top Illus. showing screw positions on the wall Illus. showing Clip being removed and reinsertedIllus. showing coiled cord connection to handset Fm Page 10 Monday, August 16, 1999 819 AM Fm Page 11 Monday, August 16, 1999 819 AM Setting the Dialing Mode Setting the DAY and TimeIllus. of TONE/PULSE switch Illus. showing Clock switchFm Page 13 Monday, August 16, 1999 819 AM Setting the Handset Volume Using ResetUsing Redial Using Tone Services on a Pulse LineUsing the Phone Number Index Card Illus. showing Phone number index card and its coverSetting the Number of Rings Answering System OperationRecording Incoming Messages Setting the TAD-1028 To Answer CallsScreening Calls Playing Messages Illus. showing PLAY/SKIPRecording a Memo Deleting MessagesChanging the Remote Operation Security Code Illus. showing Code switch Remote Operation Remote Command Codes PressTroubleshooting Resetting the TAD-1028Care and Maintenance FCC Wants YOU to Know LightningFm Page 26 Monday, August 16, 1999 819 AM Fm Page 27 Monday, August 16, 1999 819 AM RadioShack Division of Tandy Corporation Fort Worth, Texas

TAD-1028 specifications

The Radio Shack TAD-1028 is a compact and efficient telephone answering device that gained popularity in the late 1980s and early 1990s. This device was designed to cater to the growing need for reliable, user-friendly answering solutions for home and office use. The TAD-1028 not only provided users with a way to manage calls effectively, but it also introduced several technological advancements that set it apart from its competitors.

One of the standout features of the TAD-1028 is its digital recording capability. Unlike traditional cassette-based answering machines, the TAD-1028 utilized a digital chip to record messages. This innovation provided clearer audio quality, longer message storage times, and the reliability of digital technology, reducing the risk of tape degradation over time.

The TAD-1028 had the ability to record up to 30 minutes of messages, making it ideal for users who frequently received calls while away from home. Its user-friendly interface included an easy-to-read LCD display, which allowed callers to navigate through the recorded messages easily. The device was equipped with simple control buttons, making it straightforward to play, stop, rewind, and delete messages.

Another notable characteristic of the TAD-1028 was its capability to accommodate a range of phone systems. It could connect to both single-line and multi-line phones, allowing versatility in setups. This adaptability made the TAD-1028 a suitable choice for both residential users and small businesses.

The answering machine also featured adjustable recording quality settings. Users could select between a standard setting for normal calls and a high-quality option for important messages, showcasing the device's versatility. Additionally, the TAD-1028 offered a skip and repeat function, allowing users to navigate messages efficiently.

The device was equipped with a “talking” function that announced the number of messages left, making it easier for users to keep track of their calls. Furthermore, it used a rechargeable battery backup feature, ensuring that critical messages would not be lost during power outages.

In summary, the Radio Shack TAD-1028 is a pioneering telephone answering machine, offering digital technology, extended recording capabilities, and user-friendly features. It stands as a testament to the evolution of communication devices during its time, combining practicality with technological innovation. For users seeking a reliable and efficient way to manage their messages, the TAD-1028 represented an excellent solution.
Top Page Image Contents