Radio Shack owner manual Troubleshooting, Resetting the TAD-1028

Page 23

43-788.fm Page 23 Monday, August 16, 1999 8:19 AM

TROUBLESHOOTING

If you have problems using your TAD-1028, try the suggestions in this section. If you still have problems, contact your local RadioShack store for assistance.

Problem

Suggestion

 

 

 

 

The incoming message is

Be sure the memory is not full.

incomplete.

 

The caller’s message was longer than 60 sec-

 

 

onds.

 

 

 

The caller was silent for over 8 seconds.

 

 

The incoming message is

Adjust VOLUME.

unclear.

 

 

 

The TAD-1028 does not answer

Be sure the TAD is set to answer calls.

after two, four, or seven rings.

 

 

 

ANSWER indicator flashes.

The backup battery is weak or missing.

 

Replace the battery (see “Installing a Backup

 

Battery” on Page 6).

 

 

The TAD-1028 does not

Make sure the phone you used to dial the TAD

respond to the remote opera-

is a touch-tone phone. (If it is not, you can use

tion security code.

a pocket tone-dialer to enter the code and com-

 

mands.)

 

 

 

Re-enter your remote operation security code.

 

Press each button for about 2 seconds to be

 

sure the touch-tone signals are clear enough.

 

 

 

The remote operation security code might have

 

reset to the default code due to a power failure.

 

Try using 788.

 

 

You cannot record an incoming

Be sure the TAD-1028 is set to answer calls.

message.

 

Be sure the memory is not full.

 

 

 

RESETTING THE TAD-1028

Note: The outgoing messages and all information stored in memory are erased when you reset the TAD.

If your TAD-1028 stops working properly, remove the AC adapter and the battery from the TAD, then reinstall them.

23

Image 23
Contents TAD-1028 Answering System Features FeaturesTelephone Features FCC Statement Read this Before InstallationContents Illus. showing removal of battery compartment cover InstallationInstalling a Backup Battery Illus. showing connection of connector to battery terminalsIllus. showing cord routed through the strain relief slot Illus. of Volume switchIllus. showing connection of coiled cord Illus. like in under On a Desk Top Illus. of Answer PLAY/SKIP indicatorsIllus. showing routing of modular cord Illus. showing coiled cord connection to handset Illus. showing Clip being removed and reinsertedIllus. showing screw positions on the wall Fm Page 10 Monday, August 16, 1999 819 AM Fm Page 11 Monday, August 16, 1999 819 AM Illus. showing Clock switch Setting the Dialing ModeSetting the DAY and Time Illus. of TONE/PULSE switchFm Page 13 Monday, August 16, 1999 819 AM Using Tone Services on a Pulse Line Setting the Handset VolumeUsing Reset Using RedialIllus. showing Phone number index card and its cover Using the Phone Number Index CardAnswering System Operation Setting the Number of RingsScreening Calls Setting the TAD-1028 To Answer CallsRecording Incoming Messages Illus. showing PLAY/SKIP Playing MessagesChanging the Remote Operation Security Code Deleting MessagesRecording a Memo Illus. showing Code switch Remote Operation Press Remote Command CodesResetting the TAD-1028 TroubleshootingCare and Maintenance Lightning FCC Wants YOU to KnowFm Page 26 Monday, August 16, 1999 819 AM Fm Page 27 Monday, August 16, 1999 819 AM RadioShack Division of Tandy Corporation Fort Worth, Texas

TAD-1028 specifications

The Radio Shack TAD-1028 is a compact and efficient telephone answering device that gained popularity in the late 1980s and early 1990s. This device was designed to cater to the growing need for reliable, user-friendly answering solutions for home and office use. The TAD-1028 not only provided users with a way to manage calls effectively, but it also introduced several technological advancements that set it apart from its competitors.

One of the standout features of the TAD-1028 is its digital recording capability. Unlike traditional cassette-based answering machines, the TAD-1028 utilized a digital chip to record messages. This innovation provided clearer audio quality, longer message storage times, and the reliability of digital technology, reducing the risk of tape degradation over time.

The TAD-1028 had the ability to record up to 30 minutes of messages, making it ideal for users who frequently received calls while away from home. Its user-friendly interface included an easy-to-read LCD display, which allowed callers to navigate through the recorded messages easily. The device was equipped with simple control buttons, making it straightforward to play, stop, rewind, and delete messages.

Another notable characteristic of the TAD-1028 was its capability to accommodate a range of phone systems. It could connect to both single-line and multi-line phones, allowing versatility in setups. This adaptability made the TAD-1028 a suitable choice for both residential users and small businesses.

The answering machine also featured adjustable recording quality settings. Users could select between a standard setting for normal calls and a high-quality option for important messages, showcasing the device's versatility. Additionally, the TAD-1028 offered a skip and repeat function, allowing users to navigate messages efficiently.

The device was equipped with a “talking” function that announced the number of messages left, making it easier for users to keep track of their calls. Furthermore, it used a rechargeable battery backup feature, ensuring that critical messages would not be lost during power outages.

In summary, the Radio Shack TAD-1028 is a pioneering telephone answering machine, offering digital technology, extended recording capabilities, and user-friendly features. It stands as a testament to the evolution of communication devices during its time, combining practicality with technological innovation. For users seeking a reliable and efficient way to manage their messages, the TAD-1028 represented an excellent solution.