Radio Shack TAD-1028 owner manual Remote Operation

Page 21

43-788.fm Page 21 Monday, August 16, 1999 8:19 AM

REMOTE OPERATION

You can operate the TAD-1028 from al- most any touch-tone phone, or from a rotary phone using a pocket tone-dialer (available at your local RadioShack store).

Notes:

•When memory is full, the TAD- 1028 answers the call after two rings and announces, “Memory is full.” Delete some of the old mes- sages to make room in memory.

•If the 4/7/TS switch is set to TS (toll saver), the TAD-1028 answers af- ter two rings if you have new mes- sages (ones you have not played). If there are no new messages, the TAD waits for four rings before it answers. This gives you time to hang up before the TAD-1028 an- swers so you can avoid unneces- sary long-distance charges.

•You must record an outgoing mes- sage before you can remotely set the TAD-1028 to answer calls.

•The TAD-1028 sounds a 3-tone beep if you press a wrong button.

1.Dial your phone number.

•If the TAD-1028 is set to answer- off and an outgoing message is recorded, it answers the call after 10 rings and announces, “Answer off.”

•If the TAD-1028 is set to answer- on, it answers according to the number of rings you set.

2.Within 8 seconds after the outgoing message starts, enter the remote operation security code. The TAD beeps.

Note: If you do not enter each digit of the security code within 8 sec- onds, the TAD-1028 will discon- nect.

3.Enter the remote command code (see “Remote Command Codes” on Page 22).

4.You can hang up at this point or enter other remote command(s).

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents TAD-1028 Answering System Features FeaturesTelephone Features FCC Statement Read this Before InstallationContents Installing a Backup Battery InstallationIllus. showing connection of connector to battery terminals Illus. showing removal of battery compartment coverIllus. of Volume switch Illus. showing connection of coiled cordIllus. showing cord routed through the strain relief slot Illus. of Answer PLAY/SKIP indicators Illus. showing routing of modular cordIllus. like in under On a Desk Top Illus. showing Clip being removed and reinserted Illus. showing screw positions on the wallIllus. showing coiled cord connection to handset Fm Page 10 Monday, August 16, 1999 819 AM Fm Page 11 Monday, August 16, 1999 819 AM Setting the DAY and Time Setting the Dialing ModeIllus. of TONE/PULSE switch Illus. showing Clock switchFm Page 13 Monday, August 16, 1999 819 AM Using Reset Setting the Handset VolumeUsing Redial Using Tone Services on a Pulse LineIllus. showing Phone number index card and its cover Using the Phone Number Index CardAnswering System Operation Setting the Number of RingsSetting the TAD-1028 To Answer Calls Recording Incoming MessagesScreening Calls Illus. showing PLAY/SKIP Playing MessagesDeleting Messages Recording a MemoChanging the Remote Operation Security Code Illus. showing Code switch Remote Operation Press Remote Command CodesResetting the TAD-1028 TroubleshootingCare and Maintenance Lightning FCC Wants YOU to KnowFm Page 26 Monday, August 16, 1999 819 AM Fm Page 27 Monday, August 16, 1999 819 AM RadioShack Division of Tandy Corporation Fort Worth, Texas

TAD-1028 specifications

The Radio Shack TAD-1028 is a compact and efficient telephone answering device that gained popularity in the late 1980s and early 1990s. This device was designed to cater to the growing need for reliable, user-friendly answering solutions for home and office use. The TAD-1028 not only provided users with a way to manage calls effectively, but it also introduced several technological advancements that set it apart from its competitors.

One of the standout features of the TAD-1028 is its digital recording capability. Unlike traditional cassette-based answering machines, the TAD-1028 utilized a digital chip to record messages. This innovation provided clearer audio quality, longer message storage times, and the reliability of digital technology, reducing the risk of tape degradation over time.

The TAD-1028 had the ability to record up to 30 minutes of messages, making it ideal for users who frequently received calls while away from home. Its user-friendly interface included an easy-to-read LCD display, which allowed callers to navigate through the recorded messages easily. The device was equipped with simple control buttons, making it straightforward to play, stop, rewind, and delete messages.

Another notable characteristic of the TAD-1028 was its capability to accommodate a range of phone systems. It could connect to both single-line and multi-line phones, allowing versatility in setups. This adaptability made the TAD-1028 a suitable choice for both residential users and small businesses.

The answering machine also featured adjustable recording quality settings. Users could select between a standard setting for normal calls and a high-quality option for important messages, showcasing the device's versatility. Additionally, the TAD-1028 offered a skip and repeat function, allowing users to navigate messages efficiently.

The device was equipped with a “talking” function that announced the number of messages left, making it easier for users to keep track of their calls. Furthermore, it used a rechargeable battery backup feature, ensuring that critical messages would not be lost during power outages.

In summary, the Radio Shack TAD-1028 is a pioneering telephone answering machine, offering digital technology, extended recording capabilities, and user-friendly features. It stands as a testament to the evolution of communication devices during its time, combining practicality with technological innovation. For users seeking a reliable and efficient way to manage their messages, the TAD-1028 represented an excellent solution.
Top Page Image Contents