Radio Shack 1250 Telephone Operation, Setting the HANDSET’S Volume, Using Flash, Using Redial

43-986.fm Page 12 Monday, August 16, 1999 5:16 PM

TELEPHONE OPERATION

You make and answer calls with your System 1250 as you would with any oth- er phone. You see the number as you dial, then (after 15 seconds) the elapsed time for this call.

SETTING THE HANDSET’S VOLUME

You can select any of three volume set- tings by repeatedly pressing VOLUME s or t during a call.

Note: The redial memory only stores the first 24 digits of any number dialed.

USING FLASH

Use FLASH to perform the switchhook operation for special services, such as Call Waiting.

The display shows VOL.: and 1 MIN for low volume; 2 for medium volume; and 3 MAX for high volume. After each call, the System 1250 resets to the mini- mum volume level.

USING REDIAL

The redial memory holds up to 24 digits, so it can store long-distance as well as local numbers. To redial the last number you dialed, lift the handset then press

REDIAL.

For example, if you have Call Waiting, press FLASH to take an incoming call without disconnecting the current call. Press FLASH again to return to the first call.

Note: If you do not have special phone services, pressing FLASH might discon- nect the current call.

12