USING HOLD
To put a caller on hold, press HOLD. The HOLD indicator lights.
HOLD
Indicator
To resume the call, press HOLD again or pick up an extension phone on the same line.
Notes:
•Caller ID information does not ap- pear for an incoming call while a call is on hold.
•We do not recommend keeping a call on hold for very long if you sub- scribe to Caller ID. The Caller ID information sent by the phone com- pany might disconnect the call on hold if a new call comes in.
USING TONE SERVICES ON A PULSE LINE
If you have pulse service, you can still use special services that require tone signals, such as
1.Be sure T/P is set to P.
2.Dial the service’s main number.
3.When the service answers, press 
.
appears. Any additional numbers you dial are sent as tone signals.
After you complete the call and hang up, the phone resets to pulse dialing.
13