MEMORY DIALING
You can store up to 20 numbers in memory and dial any stored number by pressing one or two keys.
Each stored number can be up to 24 digits long.
Storing a Number in Memory
The System 1250 has 10 memory loca- tion buttons, and each button can recall two stored numbers: one upper memory number and one lower memory number.
Follow these steps to store a number in memory.
Notes:
•You must complete each step within 15 seconds.
•To keep your accounts secure, we recommend you do not store per- sonal access codes for services such as
•Leave the handset on the base when you store numbers.
1.Press SAVE. ENTER NUMBER ap- pears.
14
2.Enter the number you want to store, including any pause or TONE entries (see “Entering a Pause in a Memory Number” on Page 15 or “Using Tone Services on a Pulse Line” on Page 13).
You can store the very last number you dialed by pressing REDIAL.
Notes:
•If you make a mistake while en- tering the number, press SAVE to exit and start again at Step 1.
•If you enter more than 24 digits, the number flashes. Wait 15 sec- onds or press SAVE to exit and start again at Step 1.
3.Choose a memory location and store the number there.
•To store an upper memory loca- tion, simply press a memory loca- tion button.
•To store a lower memory location, press LOWER (LO appears), then press a memory location button.
Memory
Location
Buttons
LOWER