Radio Shack TAD-1026 owner manual Remote Operation, Remote ANSWER-ON

Page 26

43-786.fm Page 26 Monday, August 16, 1999 8:02 AM

REMOTE OPERATION

You can operate the TAD-1026’s an- swering system from almost any touch- tone phone, or from a rotary phone using

apocket tone-dialer (available at your lo- cal RadioShack store).

Notes:

•When the memory is full, the TAD answers the call after eight rings and plays the announcement-only message (OGM2).

•To bypass the outgoing message and begin recording a message im- mediately when you call the TAD from a remote phone, you can press # during the announcement. The TAD skips the rest of the an- nouncement, beeps once, and be- gins recording.

•If the TAD is set to T.S. (toll saver), it answers after two rings if you have new messages (ones you have not played). If there are no new mes- sages, the TAD waits for four rings before it answers. This gives you time to hang up before the TAD an- swers so you can avoid unneces- sary long-distance charges. See “Setting the Number of Rings” on Page 19.

REMOTE ANSWER-ON

Note: An outgoing message must be re- corded before you can remotely set the TAD to answer calls.

To set the TAD to answer calls, dial your phone number. The TAD answers the call after 10 rings and sounds two beeps.

Enter the remote operation security code within 8 seconds. The TAD sounds one long and one short beep and plays the OGM1 message.

You can hang up at this point and the TAD is set to answer calls. Or, you can now enter other remote command(s).

If the TAD records over 8 seconds of si- lence, it automatically disconnects.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents TAD-1026 Features Answering System FeaturesTelephone Features Read this Before Installation Contents Remote Answer-On Using Remote Commands Mounting the TAD InstallationInstalling Backup Battery On a Desk Top EpsiEpsi On a Wall PlateSetting the Dialing Mode Directly on a WallSetting the DAY Time Epsi IllustrationSetting the RINGER’S Volume Telephone Operation Using RedialSetting the Handset Volume Using Hold Using FlashUsing Privacy Memory Dialing Storing a Number in MemoryEntering a Pause Chain-Dialing Numbers Testing Stored Emergency NumbersDialing a Stored Number Answering System Operation Recording the Outgoing MessagesSetting the Number of Rings To Answer and Record Setting the TAD to Answer CallsRecording Incoming Messages To Announce OnlyScreening Calls Playing MessagesDeleting Messages Recording a Memo Recording a ConversationUsing Call BREAK- Through Changing the CBT CodeChanging the Remote Operation Security Code Remote Operation Remote ANSWER-ONUsing Remote Commands PressTroubleshooting Resetting the TADCare and Maintenance FCC Wants YOU to Know LightningFm Page 31 Monday, August 16, 1999 802 AM Radioshack

TAD-1026 specifications

The Radio Shack TAD-1026 is a classic cassette telephone answering device that has left a significant mark on both the nostalgia of vintage tech enthusiasts and the practical concerns of communication in the 1980s. Released during an era when the modern telephone was undergoing a digital revolution, the TAD-1026 integrated innovative technology to provide users with reliable message recording and playback capabilities directly through their home telephone lines.

One of the main features of the TAD-1026 is its built-in cassette recorder, which allows users to store incoming messages on standard cassette tapes. This analog approach, while seen as rudimentary by modern standards, was revolutionary at the time, as digital storage was not yet commonplace in consumer devices. Users could record up to 30 minutes of messages, making it convenient for handling calls when they were unable to answer the phone. The inclusion of an easy-to-use dial system for playback added to its appeal, allowing users to quickly respond to important messages.

The TAD-1026 also boasted a telephone line-powered design, eliminating the need for batteries or external power sources, which was a significant advantage for a device intended for long-term daily use. The integrated volume control enabled users to adjust playback sound, ensuring that messages could be heard clearly.

Noteworthy is the device's distinctive features aimed at enhancing user experience. It included an adjustable recording time, allowing individuals to customize how long messages could be recorded based on their preferences. Additionally, the TAD-1026 had an LED indicator to show status, such as recording or playback, which simplified the operation process.

In terms of technology, the TAD-1026 utilized a combination of solid-state circuitry and conventional tape technology, creating a device that was both durable and reliable. Its compact design allowed it to easily occupy a small desk or table space, a consideration that was particularly important in home settings.

Overall, the Radio Shack TAD-1026 remains a memorable testament to the blend of simplicity and functionality in consumer electronics of its time. Though it may seem antiquated by today’s standards, its design and capabilities laid foundational groundwork for the sophisticated voicemail technology that would follow. Whether for historical interest or practical use, the TAD-1026 exemplifies a significant era in telecommunications, serving as an important connection between past and present technologies.
Top Page Image Contents