Radio Shack 43-3808 Remote Operation, Security Code, Operating the System from a Remote Location

Page 18

To delete all messages after playback, hold down DELETE for about 3 seconds. The system sounds a tone.

ˆRemote Operation

While you are away from your home or office, you can use a touch-tone phone or a pulse (rotary) phone with a pocket tone dialer to enter your remote operation security code and do any of the following:

Set the system to answer calls.

Listen to your messages.

Record a new outgoing message.

Delete individual messages.

SECURITY CODE

To use your system from a remote telephone, you must first en- ter a 3-digit remote operation security code. The security code label is located on the bottom of the system. Enter the security code after the system answers and sounds two tones. Within 7 seconds, enter one of the remote commands.

OPERATING THE SYSTEM FROM A REMOTE LOCATION

Dial your phone number. Even if the system is off, it will turn on and answer after about 10 rings. After the system sounds a

18

Remote Operation

Image 18
Contents Digital Answering System Read This Before Installation FCC Statement FCC Wants YOU to KnowRead This Before Installation Contents Features Installing the Backup Battery Connecting AC PowerPreparation Connecting the System to a Phone Line Adjusting the Volume Setting the DAY and TimeTurning the System ON/OFF Setting the Number of Rings Setting the Incoming Message Length Recording the Outgoing MessageSetting the System to Answer Calls OperationUsing Announce-Only Screening Calls Recording a Memo Recording a TWO-WAY Phone Conversation Playing Incoming MESSAGES/MEMOS/ TWO-WAY Phone ConversationsDeleting Messages To replay the messages, press PLAY/PAUSE/MINRemote Operation Security CodeOperating the System from a Remote Location Remote Commands LightningLimited One-Year Warranty