Radio Shack 43-3808 Turning the System ON/OFF, Adjusting the Volume, Setting the DAY and Time

Page 9

TURNING THE SYSTEM ON/OFF

To turn on the system, press ON/OFF/STOP. The display lights and the system sounds a tone. The system is set to answer calls.

To turn it off, press ON/OFF/STOP. The display turns off and the system sounds 2 tones.

ADJUSTING THE VOLUME

Push down or pull up VOLUME 8 / 9 to increase or decrease the volume. The system sounds a tone when you change the volume.

SETTING THE DAY AND TIME

The day/time voice stamp automatically defaults to Monday, 12:00 AM when you connect the system to power.

Note: Hold down SKIP/TIME SET/CHECK continuously for Steps 1–4.

1.Turn on the system. Hold down SKIP/TIME SET/CHECK. The system sounds a tone after 1 second.

2.While holding down SKIP/TIME SET/CHECK, press REPEAT/ ANNC/DAY. The system announces “Monday” and 01 appears on the display. Repeatedly press REPEAT/ANNC/ DAY until you hear or see the correct day.

3.While holding down SKIP/TIME SET/CHECK, press MEMO/2 WAY/HOUR. The system announces “1 AM”. 01 appears on

Preparation

9

Image 9
Contents Digital Answering System Read This Before Installation FCC Wants YOU to Know FCC StatementRead This Before Installation Contents Features Installing the Backup Battery Connecting AC PowerPreparation Connecting the System to a Phone Line Adjusting the Volume Setting the DAY and TimeTurning the System ON/OFF Setting the Number of Rings Recording the Outgoing Message Setting the Incoming Message LengthOperation Setting the System to Answer CallsUsing Announce-Only Screening Calls Recording a Memo Playing Incoming MESSAGES/MEMOS/ TWO-WAY Phone Conversations Recording a TWO-WAY Phone ConversationTo replay the messages, press PLAY/PAUSE/MIN Deleting MessagesRemote Operation Security CodeOperating the System from a Remote Location Lightning Remote CommandsLimited One-Year Warranty