Speakerphone Volume
1.Press the Menu soft key to display the main menu list.
2.Press up
or down
to scroll to HS Settings and then press the Select soft key.
3.Press down
to select Audio Setup and then press the Select soft key.
4.Press the Select soft key to select Speakerphone V.
5.The display shows the current setting. Press up
or down
to select the desired volume level (Volume 1
– Volume 5) and then press the Save soft key.
NOTE: If you adjust the earpiece or speakerphone volume while on a call, the phone will remain at the adjusted level after you hang up.
█Talking Setting
Caller ID
Your ClearSounds® A600 comes from the factory preset for Talking Caller ID Mode set to ON and will announce the caller’s number between rings. To change this setting:
1.Press the Menu soft key to display the main menu list.
2.Press up
or down
to scroll to HS Settings and then press the Select soft key.
3.Press up
or down
to scroll to Talk CID and then press the Select soft key.
4.Press up
or down
to select On or Off to activate/ deactivate the Talking Caller ID function and then press the Save soft key.