Answer Mode Selection
The answering machine offers 2 modes for operation. Announce1 will answer and record, which is the conventional outgoing message that allows the caller to leave a message. Announce2 will answer only, which is the outgoing message that does not allow a caller to leave a message (you may want to select Announce2 if you do not want callers to be able to leave a message). To choose the Answer Mode:
1.Press the TAM soft key to display the TAM main menu list.
2.Press down
to scroll to TAM Setting and then press the Select soft key.
3.Press up
or down
to scroll to ANNC Select and then press the Select soft key.
4.Press up
or down
to select Announce1 or Announce2 and then press the Select soft key.
NOTE: Announce2 will be played if your answering machine becomes full.
TAM Alert
A tone will sound every minute when there is a new message and the tone will sound until messages are reviewed. This tone will be heard when you are on a phone call for at least
60 seconds. To change this setting:
1.Press the TAM soft key to display the TAM main menu list.
2.Press down
to scroll to TAM Setting and then press the Select soft key.
3.Press down
to select TAM Alert and then press the Select soft key.
4.Press up
or down
to select Off or On and then press the Select soft key.