Can’t be heard by other party
1.Check that all phone cord connections are securely plugged into the phone and wall jack.
Noise, Static, Interference while using the phone
1.A filter may be required for your home when you have DSL service or live near radio towers.
2.Make sure the AC adapter is not plugged into the wall outlet with other appliances.
3.Try relocating the phone to another location.
No numbers dialed when memory button is pressed
1.No number stored in that memory button (page 35).
2.Make sure phone number was programmed and saved (page 35).
3.Make sure programming is done in the correct dialing mode
Caller ID information does not show
1.Make sure you are subscribed to Caller ID service through your local phone company.
2.Let the phone ring a couple of times as there may be a delay in receiving the Caller ID information.
No Caller ID information while on a call
1.Make sure you service provides Caller ID information while you are on a call. This is sometimes known as “Caller ID on Call Waiting” or “Type II Caller ID”.
2.The phone cannot display the information if another phone on the same line is in use.
Answering Machine Tips
1.If you can’t hear the messages, or button tones, adjust the volume (page 52).
2.If the system always plays Announce2, the message memory may be full. Erase some messages.
3.If the incoming messages are incomplete, the message memory is full. Erase some messages.