ClearSounds A600 manual English

Page 15

5.Holding the base slightly above the mounting screws on the wall jack, push the base against the mounting screws so they are hooked into the left and right keyhole slots on the back of the phone. Slowly slide the base down until it snaps into place.

6.Plug the AC power adapter into the electrical outlet. CAUTION: To reduce risk of personal injury, fire, or damage use only the adapter provided.

Installing Batteries Three AAA re-chargeable Ni-MH batteries come with your phone. You must install the batteries before using your phone.

1.Remove the battery compartment cover by sliding it downwards.

2.Insert the new batteries. Be sure to observe battery polarity as imprinted on the inside of

the compartment.

3.Replace the battery compartment cover by sliding upward until it clicks into place.

NOTE: The batteries need to be replaced if they do not recover their full storage capacity after recharging. Check the battery icon on the LCD to see the battery charge level. When replacing the batteries, always use good quality Ni-MH AAA re-chargeable batteries.

15 – ENGLISH

Image 15

Contents Operating Manual Table of Contents Display Settings Prior to USE Important Safety Instructions Hearing Aid Compatibility HAC Handset Please Save These InstructionsLocation of Controls Right Side Dial Key Make/Answer a call End Key End a callNavigation Key Volume Up/Down Key BaseKey New Call top center Battery Icon top rightSignal Icon top left Alarm Icon top centerInstallation Steps Wall Mounting Desk / Table MountingEnglish Charging the Handset Using the Handset Carrying ClipTo Access a Menu Option Menu NavigationScreen Navigation Main Menu Submenu Basic Phone Functions Registering the HandsetTAM Telephone Answering Machine Menu Map Main Menu Submenu Using the Auto Amplification Feature Using the Handset Amplification FunctionEnglish Using your Handset Speakerphone Ringer SettingAudible Ringer Visual and Vibrating Ringer Turning the Handset Power On/Off Mode Using your Phone with Hearing Aids and Cochlear ImplantsUsing the Phone Hands-Free Headset Jack Handset in the base Answering a CallMaking a Call Handset out of the basePhone Base Settings Dialing from Standby ModeDialing from the Memory M1 M4 keys Call Waiting Flash Dialing Mode SettingModify PIN Personal Identification Number Delete/Terminate Handset Base ResetPhone Handset Settings Handset ResetHandset Name Base Selection Out of Range AlarmAuto Answer Setting Audio SettingEarpiece Volume Talking Setting Speakerphone VolumeCaller ID Dialing Menu Keys Tone SettingStoring M1-M4 Memory Numbers One-Touch Memory Setting & DialingMute Setting Redial FunctionDial from the Redial Book Use Redial List Options Language SettingContrast Settings Display SettingsSet Date & Time Date & Time Format SettingsReviewing Voice Mail Messages LCD DescriptionCaller ID CID Operation Receiving CID RecordsStoring CID Records Caller ID on Call Waiting Talking Caller ID SettingCaller ID List Viewing the Caller ListDialing a Number from the Caller List Deleting a Single Caller List Record Deleting All Caller List RecordsStoring Caller List Records Play/Stop Key Keys DescriptionsAnswer On/Off Key Annc1/Annc2 KeyTurn On/Off Voice Prompt Language announces answering machine functions TAM Alert Answer Mode SelectionAnnouncement Settings Day SettingRecording Announcement Record Announce1 Record Announce2 Using the Base to Record AnnouncementsPlay Announcement Method 1 Using the Handset Restore Default Announcements Method 1 Using the HandsetSample Outgoing Announcement1 Answering Machine Volume Message OptionsScreening Calls Play Messages Method 2 Using the Base can delete all or specific messages Remote Code & Remote Access Record a MemoRemote Code Remote Access Phonebook Operation TAM ResetClarification Adding the Phonebook EntriesCharacter Map Viewing the Phonebook Entries Using the Phonebook Options Dialing a Number from PhonebookEditing PB Phonebook Status DeletingCall Transfer between Handsets Additional FunctionsIntercom/Conference Calls Making an Internal CallPaging Key LockWay Conference Calling Torch AlarmNothing appears on the display Handset seems to have a short battery lifeLow handset or speaker volume No dial toneCaller ID information does not show Noise, Static, Interference while using the phoneNo numbers dialed when memory button is pressed Can’t be heard by other partyTo learn more, call ClearSounds at 1-800-965-9043 or Purchase accessories for Your Clearsounds PhoneFCC Wants YOU to Know Industry Canada CS03 Statement Limited ONE-YEAR Warranty English Service in United States and Canada, contact