Radio Shack TAD -797 owner manual Replacing Battery Pack

Page 37

43-797.fm Page 37 Monday, August 16, 1999 9:20 AM

REPLACING THE

BATTERY PACK

If you follow the instructions in “Connect- ing and Charging the Battery Pack” on Page 12, the battery pack should last about one year. If the battery pack does not hold a charge for more than 2 hours after an overnight charge, replace it with

anew 3.6-volt, 600 mAh battery pack with a connector that fits the socket in the battery compartment. You can order a replacement battery pack through your local RadioShack store.

Install the new battery pack as de- scribed below, then charge it for about 24 hours.

Note: To avoid losing memory numbers, install and begin charging the new bat- tery pack within 1 minute.

1.Press down and slide off the battery pack compartment cover as shown.

2.Unfasten the plastic retainer strap and lift the battery pack out of the compartment, then gently pull on the battery connector to disconnect it.

3.Insert the new battery pack’s con- nector into the socket in the com- partment, place the battery pack into the compartment, and refasten the retainer strap.

4. Replace the cover.

If you have trouble replacing the battery pack, take the phone to your local Ra- dioShack store for assistance.

Cautions:

You must use a replacement battery pack of the same size and type.

Do not dispose of the battery pack in a fire because it might explode.

Do not open or mutilate the battery pack.

Be careful not to short the battery pack by touching the connector’s pins with conducting materials, such as rings, bracelets, and keys. The battery pack or conductor might overheat and burn.

Important: This product contains a re- chargeable nickel-cadmium battery pack. At the end of the battery pack’s useful life, it must be recycled or dis- posed of properly. Contact your local, county, or state hazardous waste man- agement authorities for information on recycling or disposal programs in your area. Some options that might be avail- able are: municipal curb-side collection, drop-off boxes at retailers such as your local RadioShack store, recycling collec- tion centers, and mail-back programs.

37

Image 37
Contents TAD Important Caller ID Information Easy-to-Read Liquid Crystal Display FeaturesFm Page 4 Monday, August 16, 1999 920 AM FCC Statement Read this Before InstallationContents Replacing the Battery Pack FCC Wants You to Know Mounting the Phone InstallationOn a Desk Top On a Wall Plate Directly on the Wall Grooves Connecting and Charging the Battery Pack Setting the Dialing Mode Setting the DAY/TIME Setting the Number of RingsTurning the BASE’S Ringer on and OFF Turning Caller ID/ Call Waiting ON/OFF Setting AutotalkStoring Your Area Code Telephone Operation Adjusting Handset VolumeMaking and Receiving Calls with the Handset Answering Calls with the SpeakerphoneUsing Both Handset Speakerphone Switching Between the Handset and SpeakerphoneUsing Flash Using PAGE/INTERCOM Using RedialTransferring a Call Between the Handset and Base Memory DialingStore Name appears Storing a Number and Name in MemoryEntering a Pause Editing or Deleting a Memory NumberChain-Dialing Service Numbers Using a HeadsetTesting Stored Emergency Numbers Dialing a Memory NumberFm Page 24 Monday, August 16, 1999 920 AM Reviewing Caller ID Records Caller ID OperationCaller ID Messages Dialing Numbers from a Caller ID RecordDeleting Caller ID Records Storing a Caller ID Record to MemoryRECORDING/DELETING AN Outgoing Message TAD OperationSetting the TAD to Answer Calls Setting the Record TimeScreening Calls Recording Incoming MessagesRecording a Conversation Recording a MemoPlaying Messages Deleting Messages Adjusting the TAD’S VolumeRemote Operation Using TOLL-SAVERUsing Remote Commands Troubleshooting Fm Page 35 Monday, August 16, 1999 920 AM Care and Maintenance Replacing Battery Pack Lightning FCC Wants YOU to KnowFm Page 39 Monday, August 16, 1999 920 AM RadioShack