Aastra Telecom AT-200HT owner manual Operation, Setting the Tone/Pulse switch

Page 16

Operation

Setting the Tone/Pulse switch

The AT-200HT telephone can operate in tone or pulse dialing mode.

1.Set the PULSE/TONE switch located on the side of the telephone to the desired position. See Figure 6

2.If you're not sure which service you have, set the PULSE/ TONE switch to the TONE position. Press the TALK button and dial your number.

3.If the dial tone continues, you have pulse dialing service, set the PULSE/TONE switch to the PULSE position.

Figure 6

Tone/Pulse Switch

Setting the Ringer Off/Low/Hi switch

Set the RINGER OFF/LOW/HI switch to the HI position for normal ringer sound level. See Figure 7

14

Image 16

Contents Headset Telephone With 70 Name and Number Caller ID Table of Contents Important Safety Instructions Page Battery Cautionary Instructions Page Page Installation Battery InstallationSetting the Display Language Setting the Area Code Setting the Time and Date Installing the Belt Clip Using the HeadsetPage ConnectingLOWto the telephone line Telephone Jack Tel. Line Jack Headset Jack Setting the Ringer Off/Low/Hi switch Setting the Tone/Pulse switchOperation Making Calls Receiving Calls Using the Redial button Using the Pulse to Tone dialing feature Using the Flash buttonUsing the Mute Button Using the Pause feature Using the Call TimerReviewing Call Records Private Calls Line Error Erasing Individual Calls Erasing All CallsLow Battery Indication Care and Maintenance Troubleshooting No Dial Tone