Aastra Telecom AT-200HT owner manual Receiving Calls

Page 18

5.The number being dialed will be appear in the display.

6.When called party answers, begin speaking normally into the headset microphone.

7.After completing your call, push the TALK button to hang up. The IN USE/MUTE LED will go out.

Receiving Calls

IMPORTANT: Allow at least two rings to occur prior to an- swering calls. This assures that the AT-200HT will receive the Caller-ID information correctly.

When a call is received, the display will indicate the caller’s phone number and name, as well as the time and date of the call.

Figure 8

New Call Icon

Repeat Call

Icon

			In Use/Mute
	New Call LED		In Use/Mute
	New Call LED		LED
		16
		16

Image 18

Contents Headset Telephone With 70 Name and Number Caller ID Table of Contents Important Safety Instructions Page Battery Cautionary Instructions Page Page Installation Battery InstallationSetting the Display Language Setting the Area Code Setting the Time and Date Installing the Belt Clip Using the HeadsetPage ConnectingLOWto the telephone line Telephone Jack Tel. Line Jack Headset Jack Setting the Tone/Pulse switch Setting the Ringer Off/Low/Hi switchOperation Making Calls Receiving Calls Using the Redial button Using the Flash button Using the Pulse to Tone dialing featureUsing the Mute Button Using the Call Timer Using the Pause featureReviewing Call Records Private Calls Line Error Erasing Individual Calls Erasing All CallsLow Battery Indication Care and Maintenance Troubleshooting No Dial Tone