Aastra Telecom AT-200HT owner manual Private Calls

Page 22

2.The NEW CALL icon will be displayed for each new incom- ing call record and will be removed after you have reviewed the call.

3.The REPEAT call icon will be displayed if an incoming call has been received more than once. Only the information for the most recent call has been recorded in memory.

4.If the NEW CALL LED is still flashing when the display re- turns to the Stand-By Screen, there are new calls that you have not yet reviewed.

5.If the telephone number received is more than 10 digits, the AT-200HT will only store the first 10 digits into memory.

6.When you have reached the end of the call records, the display will indicate "-END OF LIST-"confirming there are no more calls stored in memory.

7.When the AT-200HT stored Caller-ID information memory is full, older calls stored in memory will be replaced as new calls are received.

Private Calls

If the caller has exercised their option to block their name and number from being sent, "-BLOCKEDCALL-"will be displayed.

20

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Headset Telephone With 70 Name and Number Caller ID Table of Contents Important Safety Instructions Page Battery Cautionary Instructions Page Page Installation Battery InstallationSetting the Display Language Setting the Area Code Setting the Time and Date Installing the Belt Clip Using the HeadsetPage ConnectingLOWto the telephone line Telephone Jack Tel. Line Jack Headset Jack Setting the Ringer Off/Low/Hi switch Setting the Tone/Pulse switchOperation Making Calls Receiving Calls Using the Redial button Using the Pulse to Tone dialing feature Using the Flash buttonUsing the Mute Button Using the Pause feature Using the Call TimerReviewing Call Records Private Calls Line Error Erasing Individual Calls Erasing All CallsLow Battery Indication Care and Maintenance Troubleshooting No Dial Tone
Top Page Image Contents