GE 2-9753, 2-9751, 2-9752 manual Desktop, Installation

DESKTOP	1
INSTALLATION	4

2

3 PULSE/TONE switch

1.Plug the telephone line cord into the base and into a modular jack.

2.Plug the power supply cord into the base, into an AC outlet.

3.Set the PULSE/TONE switch to TONE for touch-tone service, or PULSE for rotary service. If you don’t know which type of service you have, check with the phone company.

4.Raise the base antenna.

5.Turn on the RINGER switch so the handset rings for incoming calls.

6.Place handset in the base to charge for 12 hours. The CHARGE/IN USE light comes on indicating that the battery is charging.

PHONECHANNEL

1	ABC 2	DEF 3
GHI 4	JKL 5	MNO6

PRS 7 TUV 8 WXY 9

1

2

3

4

5

6

7

8

9

0￿

PAGE / FIND

CHARGE

NOTE: Use only the Thomson power supply that came with this unit. (5-2412 for model 2-9752 or 5-2411 for models 2-9751 and

2-9753) Using other adapters may damage the unit.

TONE* OPER0 #

VOLUME	MEMORY	REDIAL
RINGER		FLASH
OFF	ON

RINGER switch

IN USE

CHARGE/IN USE light

3