WALL MOUNT INSTALLATION
1.Plug one end of the telephone line cord into the jack marked PHONE LINE on the back of the unit, and plug the other end into a modular wall jack.
2.Connect the power supply adapter to the POWER 9V DC jack on the back of the unit, and plug it into an AC outlet.
3.Install the base plate by putting the tabs into the slots on the top of the unit first, and then snapping the bottom tabs into place.
4.Slip the mounting holes over the wall plate posts and slide the unit down firmly into place. (Wall plate
not included.) | 3 |
5.Set the TONE/PULSE switch to TONE if you have
6.Turn on the RINGER switch so the handset rings for incoming calls.
7.Place handset in the base to charge for 12 hours. The CHARGE/ IN USE light comes on indicating that the battery is charging.
NOTE: The easiest way to fit the telephone line cord into the base plate, is to leave it wrapped up. Just unwrap enough cord to reach the PHONE LINE jack and the modular wall jack.
1
2
4
5
6
PHONECHANNEL
1 | ABC 2 | DEF 3 |
| PAGE / FIND |
|
| |||
GHI 4 | JKL 5 | MNO6 | 7 |
|
|
|
| CHARGE | |
PRS 7 | TUV 8 | WXY 9 |
| IN USE |
* | OPER0 | # |
|
|
TONE |
|
| ||
VOLUME | MEMORY | REDIAL |
|
|
RINGER | FLASH |
|
| |
OFF | ON |
|
|
|
4