ANSWERING SYSTEM DISPLAY MESSAGES
Total number of messages. |
| |
CL (blinking) | The voice time/day stamp needs set. | |
Answerer off. |
| |
An (blinking) | Currently answering a call. |
|
F (blinking) | Memory is full. |
|
LA (Line Access) | External line remote answerer. | |
(blinking) | Recording Announcement or memo. | |
HANDSET SOUND SIGNALS |
| |
Signal |
| Meaning |
|
| |
A long warbling tone (with ringer on) | Signals an incoming call | |
Three short beeps |
| Page signal |
One short beep (every 7 seconds) | Low battery warning | |
|
|
|
TROUBLESHOOTING GUIDE
TELEPHONE SOLUTIONS
No dial tone
•Check or repeat installation steps.
•Make sure base power cord is connected to a working electrical outlet.
•Make sure the telephone line cord is connected to the base and the modular phone jack.
•Connect another phone to the same jack; if there is still no dial tone, the problem might be your wiring or local service.
•The cordless handset may be out of range of the base. Move closer to the base.
•Make sure the battery is properly charged (16 hours).
51