GE 28129xx4, 819, 28129xx6, 28129xx5 Telephone Operation Visual Indicators, Speakerphone Operation

2.Enter the security code during the outgoing announcement or after you hear the tone.

3.Follow the voice menu to use the answering system ’s remote functions.

Memory Full

When answering system memory is full, the system answers after 10 rings, beeps and waits for you to enter the 3-digit security code. If you don’t enter the security code within 8 seconds, the phone hangs up.

You should erase some messages so the answering system can record new messages.

NOTE: The unit also answers after the 10th ring if it is turned off. To access the answering system, enter your 3-digit security code after you hear the beep.

Telephone Operation

Visual Indicators

CHARGE/IN USE Indicator on the Base

The CHARGE/IN USE indicator is lit when the phone is in use or a handset is charging in the base charge cradle. It flashes when you receive a call.

TALK Indicator and SPKR Indicator on the Handset

The TALK Indicator or SPKR Indicator is lit when the handset is in use. It flashes when you receive a call.

VMWI Indicator on Handset and the Base

IMPORTANT: In order to use this unit’s Visual Message Waiting Indicator (VMWI) feature, you must subscribe to this service from your phone company.

The VMWI indicator on the top of the handset or VOICE MAIL indicator on the base flashes when you receive a new message from your service provider.

Speakerphone Operation

NOTE: If you are using the speakerphone, remain close to handset so the party you are speaking to can hear you.

•If you are using the handset and want to switch to the speakerphone, press the SPKR button, press END/cancel button to end conversation.

•If you are using the speakerphone and want to switch to the handset, press the TALK button, press END/cancel button to end conversation.

35