4.Plug the AC power converter into the electrical outlet and the DC connector into the jack on the bottom of the base.
5.Place the handset in the base cradle. The CHARGE IN USE indicator turns on, verifying the battery is charging.
After the Handset and Base have been powered up, the base displays the Date/ Time set up screen for entry. You MUST enter the date/time prior to operating the unit.
6.Use the number keys to enter the year and the date.
7.Press the Next (SKL) button to move to Set Time menu.
8.Use the number keys to enter the time and use the 
or 
button to select AM or PM.
9.Press the Store (SKL) button to save the settings. You will hear a confirmation tone.
10.Allow the phone to charge for 16 hours prior to first use. If you don’t properly charge the phone, battery performance is compromised.
Wall Mounting
1.Turn the base over.
2.Attach the wall mounting pedestal by first inserting the tabs on the open edge of the pedestal into the slots on the lower portion of the bottom of the base. Then push down and snap the pedestal into place.
3.Slip the mounting holes (on the back of the base) over the wall plate posts, and slide the unit down into place. (Wall plate not included.)
NOTE : If desired, gather the extra telephone line and power adaptor cord and store inside the wall mounting bracket.
Answering System Setup
This section shows you how to set up your answering system to receive incoming calls.
Setting the Voice Prompt Language
The voice prompt language on the base is the same as the display prompt language on the base. If you select Spanish as your voice prompt language on the base, the display prompt language will also be Spanish. The default prompt language is English
NOTE: The voice prompt language of the handset is determined by the voice prompt language set on the base. However the handset display prompt is set ONLY through the handset.
15