Chapter 2
System Utilities
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises.
To activate the BIOS Utility, press m during POST (when “Press <F2> to enter Setup” message is prompted on the bottom of screen).
Press m to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change boot device without entering BIOS Setup Utility, please set the parameter to “enabled”.
Press <F12> during POST to enter
PhoenixBIOS Setup Utility
Information | Main | Security | Boot | Exit |
|
|
|
|
|
CPU Type : | Intel(R) Core(TM) 2 CPU T5500 |
CPU Speed : | 1.66 GHz |
IDE0 Model Name : | |
IDE0 Serial Number : | SB2451SJKA7H7E |
ATAPI Model Name : | |
BIOS Version : | V1.00 |
VGA BIOS Version : | Intel V1471 |
Serial Number : | XXXXXXXXXXXXXXXXXXXXXXXXXXXX |
Asset Tag Number : |
|
Product Name : |
|
Manufacturer Name : |
|
UUID Number : | XXXXXXXXXXXXXXXXXXXXXXXXXXXX |
F1 Help | Select Item | F5/F6 Change Values | F9 Setup Defaults | |
Esc Exit | Select Menu | Enter Select |
| F10 Save and Exit |
|
|
|
|
|
Chapter 2 | 39 |
