GE 21025/26 manual Handset Needs Registration, Hold Base Wait for Beep, Handset Registered

HANDSET NEEDS

REGISTRATION

1.Press the mute/program button and HOLD BASE PAGE WAIT FOR BEEP shows in the display.

HOLD BASE PAGE

WAIT FOR BEEP

2.Press and hold the page button on the base until you hear a long beep and the handset displays HANDSET # REGISTERED.

HANDSET 1

REGISTERED

3.When handset registration is complete, you may name the handset. ENTER NAME shows in the display. Repeat step 1 through step 3 in the Handset Name section.

NOTE: If the handset was registered previously and a name assigned, the name automatically displays after a successful re-registration.

To re-register a handset:

1.Press the mute/program button until REGISTRATION 1YES 2NO shows in the display.

2. Use the touch-tone pad on the handset or the cid/vol ( or ) button to select 1YES. The default setting is 2NO.

REGISTRATION

1 YES 2 NO

17