GE 21025/26 manual Security Code, 628

SETTING THE SECURITY CODE FOR REMOTE ACCESS

The product provides you with the ability to access the answering system from a tone dialing telephone in another location. The security code is required for remote access, and it prevents unauthorized access to your answering system. The default security code is 1 2 3, and you may only change the security code at the handset.

1.Press the exit/answerer button on the handset.

2.Press the *tone button to display SECURITY CODE 1 2 3.

SECURITY CODE

1 2 3

3.Use the touch-tone pad on the handset to enter your new 3-digit security code. For example, press the 6, 2, and 8 number key for security code 628.

SECURITY CODE

628

NOTE: If you want to re-enter the security code, enter the numbers again. The new numbers replace the old numbers.

To keep the current security code, exit the remote access mode, and return to standby mode, press the exit/answerer button.

4.Press the *tone button, and you will hear a confirmation tone. The new security code shows in the display.

SECURITY CODE

628

44