Programmable Functions

CONNECTING THE TELEPHONE LINE

On the base, plug the one end of the telephone line cord into the jack on the back of the base and the other end into a modular wall phone jack.

WALL MOUNTING THE BASE

NOTE: For best results, leave the base on a flat surface during initial charging before you hang it on the wall.

1.Turn the base over.

2.Attach the wall mounting pedestal by first inserting the tabs on the open edge of the pedestal into the slots on the lower portion of the bottom of the base. Then push down and snap the pedestal into place.

3.Slip the mounting holes (on the back of the pedestal) over the wall plate posts and slide the unit down into place. (Wall plate not included.)

This system uses a menu structure and soft key function buttons to give you access to all of the built-in features.

USING THE SOFT KEYS

There are three buttons under the display box which represent several soft key (programmable) functions. Use the buttons to activate the soft key icons that appear in the display box.You may program the following items with the soft keys: Language, Area Code, RingerTone,Tone/Pulse, Registration, Deregistration, Walkie-Talkie, and Default Setting.

LANGUAGE

Make sure your phone is OFF (not in TALK mode).

1.Press the MENU soft key to go to the LANGUAGE menu.

2.Press the cid/vol (up or down arrow) button and the OK soft key to go to the language sub menu.

3.Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP, or use the cid/ vol (up or down arrow) button to scroll to the desired language. (English is the default setting).