STORING A REDIAL NUMBER
1.Make sure the phone is OFF (not in TALK mode).
2.Press the DIR soft key to display SELECT MEMORY
3.Press any number key
4.Press the EDIT soft key and ENTER NAME shows on the display.
5.Use the touch tone pad to enter the name, then press the OK soft key and ENTER TEL NUMBR shows on the display.
6.Press the redial button to display the redial number.
7.Press the OK soft key again to confirm.
NOTE: If the redial number has more than 24 digits, the redial number cannot be stored in memory.
INSERTING A PAUSE IN THE DIALING SEQUENCE
Press the # button on the handset number pad to insert a delay in dialing sequence (of a stored telephone number) when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or to wait for a computer access tone.) Each pause counts as one digit in the dialing sequence.
REVIEWING, CHANGING, OR DELETING INFORMATION STORED IN MEMORY
To Review:
1.Make sure the phone is OFF (not in TALK mode).
2.Press the DIR soft key to display SELECT MEMORY
3.Press the cid/vol (up or down arrow) buttons to scroll the stored names and numbers, or use the handset number pad to enter the memory location number.
25