GE 21006 manual Belt Clip and Optional Headset

Page 33

BELT CLIP AND OPTIONAL HEADSET

CONNECTING THE BELT CLIP

To attach the belt clip, insert the sides of the belt clip into the slots on each side of the handset. Snap the ends of the belt clip into place.

CONNECTING AN OPTIONAL HEADSET TO THE HANDSET

Each handset can be used with an optional headset hands free operation.

1.Connect the headset to the headset jack on the side of the handset The handset receiver and microphone are disabled when the headset is connected.

2.Adjust the headset to rest comfortably on top of your head and over your ear. Move the microphone to approximately two to three inches from your mouth.

3.Press the talk/callback button to answer a call or make calls using the headset.

4.To return to normal operation, unplug the headset from the jack.

	Belt clip
Headset jack	Slot for
Slot for	Slot for
belt clip	belt clip

Headset Plug

33

Image 33

Contents 21006 Equipment Approval Information Interference InformationHearing AID Compatibility HAC Table of Contents Display Messages Introduction FeaturesPage Page/int button Handset LayoutHandset Charge Cradle Layout Base LayoutMake sure your package includes the items shown here Parts ChecklistImportant Installation Information Installing the Phone Programmable Functions Ringer Tone Area CodeTONE/PULSE Registration Walkie Talkie Basic Operation Default SettingAnswering a Call FLASH/CALL Waiting Handset to Handset Paging Intercom Receiving AN Intercom Call THREE-WAY Calling Memory To Review DELETE? To ChangeCaller ID Caller ID Error Codes Reviewing the Caller ID List Number of digits Explanation Example To delete a Caller ID message Changing the Battery Belt Clip and Optional Headset Incomplete Data Display MessagesRept Handset Sound SignalsTroubleshooting Guide Page Caller ID Causes of Poor Reception General Product CareService Orderform Index Page For how long after your purchase Limited Warranty