GE 00017670, 25982xx3 manual

Page 42

Handset/Base does not ring

•Make sure the handset ringer and the base ringer is ON.

•The cordless handset may be out of range. Move closer to the base.

•You may have too many extension phones on your line. Try unplugging some phones.

•Check for dial tone. If no dial tone is heard, see No dial tone above.

You experience static, noise, or fading in and out

•Change channels.

•The cordless handset may be out of range of the base. Move closer to the base.

•Make sure base is not plugged into an outlet with another household appliance.

•Charge the battery.

Unit beeps

•Place the handset in the cradle for 20 seconds. If it still beeps, charge battery for 16 hours.

•Clean charging contacts on cordless handset and charge cradle with a soft cloth, remove comma or an eraser.

•Replace the battery.

Memory Dialing doesn’t work

•Did you program the memory location keys correctly?

•Did you follow proper dialing sequence?

Unit locks up and no communication between the base and cordless handset

•Unplug the AC power adaptor from the wall outlet and the back of the base. Remove the handset battery. Wait for 30 seconds and plug the power adaptor back into the base and wall outlet. Reconnect the battery and charge for 16 hours.

42

Image 42

Contents Model Equipment Approval Information Notification to the Local Telephone CompanyLicensing Interference InformationHearing Aid Compatibility HAC FCC RF Radiation Exposure StatementTable of Contents Display Messages Introduction Before You Begin Telephone Jack RequirementsInstallation Important Installation GuidelinesDigital Security System Handset and Charge Cradle Layout Base LayoutInstalling the Phone Installing the Handset BatteryInstalling the Phone Connecting the AC Electrical PowerConnecting the Telephone Line Voice Instructions Answering System Set UpConnecting the Corded Handset Attaching the Pedestal BracketReviewing Announcement Answering System OperationRecording the Outgoing Announcement Leaving a MessageScreening Calls from the Base Screening Calls from the HandsetMessage Playback from Base Unit Erasing Messages Leaving a MemoTelephone Set Up LanguageHandset Name Display ContrastRings to Answer Security Code Base Ringer LevelHandset Ringer ON/OFF Ringer ToneVIP Ring Tone Setting Day/Time Local Area CodeTone/Pulse Dialing Transfer ON/OFFRegistration Link Cordless Handset Default Setting Basic OperationAnswering a Call Manual Channel Selection Call TimerMaking a Call Auto StandbyHandset Ringer on/off Shortcut Do Not DisturbFlash Call Transfer Last Number RedialTransferring Call from Base to Cordless Handset Hold Paging the Cordless HandsetVolume MuteAnswering System Receiving a Call with Speakerphone Switching Between Speakerphone and HandsetBase Unit Speakerphone Operation Making a Call with SpeakerphoneCordless Handset Speakerphone Operation Switching Between the Speakerphone and Handset EarpieceMemory Storing a Name and Number in MemoryStoring a Redial Number Inserting a Pause in the Dialing SequenceReviewing, Changing or Deleting Stored Names/Numbers Dialing a Stored Number Chain Dialing from Memory Number ForCaller ID CID Call Waiting Caller IDReceiving CID Records Storing CID Records In CID Memory Reviewing Call RecordsStoring CID Records in Internal Memory Dialing a Caller ID NumberDeleting the Current Caller ID Record Deleting All Caller ID RecordsUsing the Handset Remote AccessCaller ID Errors Answering System IndicatorAccessing the Answering System from Another Location Memory FullChanging the Battery Battery Safety PrecautionsChanging the Security Code Headset and Belt Clip Operation Connecting an Optional Headset to the HandsetConnecting the Belt Clip Display MessagesEND of List Handset Sound Signals Troubleshooting GuideTelephone Solutions Page Caller ID Solutions Battery SolutionsCauses of Poor Reception Service General Product CareIndex Reviewing Changing or Deleting Stored Names/Numbers Limited Warranty For how long after your purchaseAccessory Information Limitation of Warranty