GE 00017670, 25982xx3 manual Installing the Phone, Installing the Handset Battery

Page 9

Installing the Phone

Installing the Handset Battery

NOTE: You must connect the handset battery before using the cordless handsets.

CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Nickel-Cadmium (Ni-Cd) battery model 5-2729, which is compatible with this unit.

1.Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset.

2.Locate the battery compartment on the back of the handset.

3.Plug the battery pack cord into the jack inside the compartment.

NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment. To ensure proper battery installation, the connector is keyed and can be inserted only one way.

battery

pack

black wire

PRESS DOWN
FIRMLY	red wire
	red wire

4.Insert the battery pack.

5.Close the battery compartment by pushing the door up until it snaps into place.

6.Place the handsets in the charging cradles.

Allow handsets to charge for 16 hours prior to first use. If you don’t properly charge the handsets, battery performance is compromised.

Image 9

Contents Model Notification to the Local Telephone Company Equipment Approval InformationHearing Aid Compatibility HAC Interference InformationLicensing FCC RF Radiation Exposure StatementTable of Contents Display Messages Telephone Jack Requirements Introduction Before You BeginInstallation Important Installation GuidelinesDigital Security System Base Layout Handset and Charge Cradle LayoutInstalling the Handset Battery Installing the PhoneInstalling the Phone Connecting the AC Electrical PowerConnecting the Telephone Line Connecting the Corded Handset Answering System Set UpVoice Instructions Attaching the Pedestal BracketRecording the Outgoing Announcement Answering System OperationReviewing Announcement Leaving a MessageScreening Calls from the Base Screening Calls from the HandsetMessage Playback from Base Unit Leaving a Memo Erasing MessagesLanguage Telephone Set UpHandset Name Display ContrastRings to Answer Base Ringer Level Security CodeHandset Ringer ON/OFF Ringer ToneVIP Ring Tone Local Area Code Setting Day/TimeTone/Pulse Dialing Transfer ON/OFFRegistration Link Cordless Handset Default Setting Basic OperationAnswering a Call Making a Call Call TimerManual Channel Selection Auto StandbyHandset Ringer on/off Shortcut Do Not DisturbFlash Call Transfer Last Number RedialTransferring Call from Base to Cordless Handset Paging the Cordless Handset HoldVolume MuteAnswering System Base Unit Speakerphone Operation Switching Between Speakerphone and HandsetReceiving a Call with Speakerphone Making a Call with SpeakerphoneMemory Switching Between the Speakerphone and Handset EarpieceCordless Handset Speakerphone Operation Storing a Name and Number in MemoryStoring a Redial Number Inserting a Pause in the Dialing SequenceReviewing, Changing or Deleting Stored Names/Numbers Dialing a Stored Number Number For Chain Dialing from MemoryCaller ID CID Call Waiting Caller IDReceiving CID Records Reviewing Call Records Storing CID Records In CID MemoryDialing a Caller ID Number Storing CID Records in Internal MemoryDeleting All Caller ID Records Deleting the Current Caller ID RecordCaller ID Errors Remote AccessUsing the Handset Answering System IndicatorMemory Full Accessing the Answering System from Another LocationChanging the Battery Battery Safety PrecautionsChanging the Security Code Connecting the Belt Clip Connecting an Optional Headset to the HandsetHeadset and Belt Clip Operation Display MessagesEND of List Handset Sound Signals Troubleshooting GuideTelephone Solutions Page Caller ID Solutions Battery SolutionsCauses of Poor Reception General Product Care ServiceIndex Reviewing Changing or Deleting Stored Names/Numbers For how long after your purchase Limited WarrantyLimitation of Warranty Accessory Information