GE 28821 manual Answering System Display Messages, Handset Sound Signals, Telephone Solutions

Page 52
Indicates the total number of messages. The voice time/day stamp needs to be set. Answering system is turned off.
The system is answering a call. Answering system memory is full.
The system is recording a memo or an announcement.
External line remote answering system.

Answering System Display Messages

The following messages show the status of the answering system or help you set up and use the system.

0-59

CL (blinking)

- -

An (blinking)

F (blinking)

Six bars (blinking)

LA (Line Access)

Handset Sound Signals

Signal

Meaning

A long warbling tone

Signals an incoming call

(with ringer on)

 

Three short beeps

Page signal

(several times)

 

One beep every 7 seconds

Low battery warning

Troubleshooting Guide

 

Telephone Solutions

No dial tone

Check or repeat installation steps:

Make sure the base power cord is connected to a working electrical outlet. Make sure the telephone line cord is connected to the base and the wall jack.

Connect another phone to the same jack. If it doesn’t work, the problem might be your wiring or local service.

The handset may be out of range of the base. Move closer to the base.

52

Image 52
Contents Page Important Information Interference Information Telephone Network InformationREN Number Hearing Aid Compatibility HACLicensing FCC RF Radiation Exposure StatementTable of Contents From Another Location Answering System Display Messages Introduction Before You BeginTelephone Jack Requirements Installation Digital Security SystemImportant Installation Guidelines Handset Layout Base Layout Top & Front Views Voicemail indicatorMemo button Installing the Phone Installing the Handset BatteryBase Station Handset Access Answering System SetupAnswerer Rings to Answer Set Prompt LanguageFrom the Answerer Menu Message Alert Speaker VolumeSecurity Code Voice Instruction Recording the Outgoing AnnouncementReviewing and Choosing the Announcement Sample Outgoing AnnouncementProgramming the Telephone Standby ScreenProgramming Functions Phone BookAdd Records Inserting a Pause in the Dialing Sequence of a Stored NumberEdit Records Delete RecordsIgnore The Incoming Call Dialing a Number from Internal MemoryRoom Monitor applicable only with additional handsets Set Alarm Clock From the Handset Setup Menu Handset SetupLanguage Handset Name Ringer ToneRinger Volume VIP MelodyStoring VIP Melody Changing a Stored VIP Melody RecordKey Tone Reviewing And Deleting Stored VIP Melody RecordSet Day/Time Area Code EqualizerTone/Pulse Registration De-RegistrationGlobal De-registration Select 2NO, if you do not want to de-registerVisual Indicators Telephone OperationMaking a Call Speakerphone OperationAnswering Calls Call Timer Ringer Volume ShortcutAuto Standby Flash/Call WaitingLast Number Redial ExitHandset to Handset Paging Applicable only with additional handsetsReceiver Volume Control Paging All Handsets from a HandsetPaging from the Base/Group MuteDo Not Disturb D-N-D Intercom OperationMaking an Intercom Call Advanced Intercom Features Receiving an Intercom CallCaller ID CID Transferring External Calls to Other HandsetsReceiving CID Records Call Waiting Caller IDStoring CID Records In CID Memory Dialing a CID Number Reviewing CID RecordsStoring CID Records in Internal Memory Deleting a CID Record Deleting All CID RecordsAnswering System Operation Message Counter IndicatorLeaving a Message/Memo Screening Calls from the Base Message PlaybackMemory Full Erasing MessagesRemote Access Cordless HandsetTo erase all previously played Messages in a mailbox To erase a message from the handsetWhen the answering system picks up Accessing the Answering System from Another LocationScreening Calls from the Handset Connecting an Optional Headset to the Handset Connecting the Belt ClipBelt Clip and Optional Headset Changing the Battery Battery Safety PrecautionsDisplay Messages ChargingIncomplete Data Paging orTelephone Solutions Handset Sound SignalsAnswering System Display Messages Page Caller ID Solutions Answering System SolutionsBattery Solutions Causes of Poor Reception General Product CareWarranty Accessory Information 28801To order, call the nearest distributor for your area Ontario 905 Manitoba 204 British Columbia 604 Quebec 514Index Recording the Outgoing Announcement Model